Why would a DVD have no sound?

Why would a DVD have no sound?

Ensure the disc is inserted into the DVD player correctly. Ensure the television or stereo receiver is set to the correct input for the DVD player. Ensure the television or stereo receiver is not set to a MUTE or SPEAKER OFF setting. Ensure that the volume on the television or receiver is set to an audible level.

What to do if your DVD drive is not recognized?

In Device Manager, expand DVD/CD-ROM drives, right-click the CD and DVD devices, and then select Uninstall. When you are prompted to confirm that you want to remove the device, select OK. Restart the computer. After the computer restarts, the drivers will be automatically installed. If your problem is not solved, try the next method.

Why is my DVD player not showing up?

The driver may be corrupted or missing. (Code 39) Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41) This issue may have occurred after one of the following situations: You upgrade the Windows operating system. You install or uninstall CD or DVD recording programs.

Why is my computer not recognizing my CD?

The device is not working properly because Windows cannot load the drivers required for this device. (Code 31) A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32) Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.

Do you need to disconnect an audio device from a computer?

Audio devices might need to be disconnected from the computer during the troubleshooting process. caution: Always follow manufacturer instructions for disconnecting USB devices from the computer. Some USB devices must be turned off and/or ejectedbefore they are disconnected from the computer.

Why do I get no sound from my DVD player?

But I can’t seem to get any sound from my DVD player, connected to my TV via HDMI cable. I’ve tried different inputs on the TV, but the problem remains. I checked the Audio settings on the DVD player, and it’s set to PCM Audio. (I tried the other 3 audio settings choices, but none solved the problem). Any ideas what might be wrong?

How to troubleshoot if there is no sound or…?

Check that there are no headphones connected. Check if the issue also occurs to other device connected to the TV. You may try to changing the TV channel or play back a movie on a DVD player. Try different cables to verify this is not a bad set of cables.

What to do if your TV won’t play a DVD?

Tried different HDMI cables, different HDMI inputs (including ARC), factory reset DVD player, tried DVD player on another TV (sound worked), made sure software was up to date… nothing made the sound work. I ended up having to go for family stuff, but the guy said to try a factory reset on the TV, which seems unnecessary.

What to do when there is no sound on your TV?

IMPORTANT: Verify that the source you are playing is encoded with Surround Sound audio. If not, the audio will be very difficult to hear using a Surround Sound setting. Set Surround Sound to OFF when playing a source that is not encoded with a Surround Sound signal. Check each speaker to make sure they are properly connected to the A/V receiver.