Can you change the main output to channel 17?

Can you change the main output to channel 17?

Change your Main output to channel 17-18 in your software if you can. Audacity is free and will allow you to do that. He’s right. Change your Main output to channel 17-18

What kind of output does a sound mixer use?

The main output from most mixing devices is a stereo output, using two output sockets which should be fairly obvious and easy to locate. The connectors are usually 3-pin XLRs on larger consoles, but can also be 6.5mm TR (jack) sockets or RCA sockets. The level of the output signal is monitored on the mixer’s VU meters.

Where is the low latency button on a Cue Mix?

The Main output always acts as a Cue Mix, and any Audio or Instrument Channels routed to it can be monitored using Native or Hardware Low-Latency Monitoring (if enabled). To engage Native or Hardware Low-Latency Monitoring for the Main output, enable the “Enable Low-Latency Monitoring” (or “Z”) button, found below its volume fader.

What is the nominal level of 0dB in a sound mixer?

In professional circles, the nominal level of 0dB is considered to be +4 dBu. Consumer-level equipment tends to use -10 dBV. The best way to check the levels of different equipment is to use audio test tone. Send 0dB tone from the desk and measure it at the next point in the chain.

What should the output level be on a sound mixer?

The connectors are usually 3-pin XLRs on larger consoles, but can also be 6.5mm TR (jack) sockets or RCA sockets. The level of the output signal is monitored on the mixer’s VU meters. The ideal is for the level to peak at around 0dB or just below.

In professional circles, the nominal level of 0dB is considered to be +4 dBu. Consumer-level equipment tends to use -10 dBV. The best way to check the levels of different equipment is to use audio test tone. Send 0dB tone from the desk and measure it at the next point in the chain.

Which is the output of the monitor mix?

The monitor mix is the output mix which you will listen to via headphones or speakers. To select which audio output the monitor mix plays through, click on the dropdown menu and select the desired output.

How to use ASIO4ALL for multiple audio outputs?

Install ASIO4ALL v2.13 Modify Jack PortAudio shortcut using “C:\\Program Files (x86)\\Jack\\jackd.exe” -R -S -d portaudio -d “ASIO::ASIO4ALL v2” Start the Jack PortAudio shortcut (jackaudio server is running) Start the Jack Contro shortcut (ASIO4ALL starts)